[Updated 70-743 Dumps!]High Quality Braindump2go 70-743 Exam PDF Dumps 267Q Free Share[Q137-Q147]

2018/10/30 Braindump2go 70-743 Exam Dumps with PDF and VCE New Updated Today! Following are some new 70-743 Real Exam Questions:

1.|2018 Latest 70-743 Exam Dumps (PDF & VCE) 267Q&As Download:

https://www.braindump2go.com/70-743.html

2.|2018 Latest 70-743 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/1Ca7dKgVwY7mxl8BaUz-s4YT1zeRYpIBW?usp=sharing

QUESTION 137
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

QUESTION 138
Hotspot Question
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://www.vembu.com/blog/hyper-v-virtual-machine-load-balancing/

QUESTION 139
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

QUESTION 140
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.

You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

QUESTION 141
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation:
Deploy Network Controller using Windows PowerShell
Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER. Install-WindowsFeature -Name NetworkController ­IncludeManagementTools
Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject ­Name <string> -Server<String> -FaultDomain <string>-RestInte
Step 3: Install-NetworkControllerCluster
To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster ­Node <NetworkControllerNode[]> ­ClusterAuthentication …
Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment. Install-NetworkController ­Node <NetworkControllerNode[]> ­ClientAuthentication
References:
https://technet.microsoft.com/en-us/library/mt282165.aspx

QUESTION 142
Hotspot Question
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
You need to apply patches to Server1.
Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.

Answer:

QUESTION 143
Hotspot Question
Your network contains an Active Directory forest named contoso.com.
You need to add a new domain named fabrikam.com to the forest.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/hh974722(v=wps.630).aspx

QUESTION 144
Hotspot Question
Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.
Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1.
All of the domain controllers are located in the main office.
You install a read-only domain controller (RODC) named RODC1 in the branch office.
You create a user account for a new user named User1.
You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.
You are notified on the SAN and configure both servers to connect on Monday.
You need to ensure that User1 can log on in the branch office site on Monday.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/cc742095(v=ws.11).aspx

QUESTION 145
Hotspot Question
A virtual machine named VM1 is running in the failover cluster.
The role for VM1 is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the Information presented in the graphic.

Answer:

QUESTION 146
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
You create a domain user account named User1.
You need to ensure that User1 can use IPAM to manage DHCP.
Which command should you run on Server1? To answer, select the appropriate options in the answer area.

Answer:

QUESTION 147
Hotspot Question
You have a server named VM1. VM1 is a virtual machine on a Hyper-V host that runs Windows Server 2016.
You need to create a checkpoint that includes the virtual machine memory state of VM1.
What commands should you run? To answer, select the appropriate options in the answer area.

Answer:


!!!RECOMMEND!!!

1.|2018 Latest 70-743 Exam Dumps (PDF & VCE) 267Q&As Download:

https://www.braindump2go.com/70-743.html

2.|2018 Latest 70-743 Study Guide Video:

https://youtu.be/C17F08M6dTQ

         

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back