Braindump2go 2015 Latest 70-680 Exam Dumps VCE Guarantee 100% Exam Pass (521-535)

New Braindump2go 70-680 Exam Questions Updated Today! Want to know New Questions in 2015 70-680 Exam? Download Free Braindump2go 70-680 Exam Preparation Materials Now!

Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring

Keywords: 70-680 Exam Dumps,70-680 Practice Tests,70-680 Practice Exams,70-680 Exam Questions,70-680 PDF,70-680 VCE Free,70-680 Book,70-680 E-Book,70-680 Study Guide,70-680 Braindump,70-680 Prep Guide

 

QUESTION 521
Which of the following best describes how the user is alerted with information system and configuration alerts?

A.    A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the
screen will not move.
B.    If Aero is installed the shaking alert flag appears in the index bar of every open window.
C.    A flag in the taskbar with a red “x” indicates there is a problem needing attention.
D.    All of the above.

Answer: C

QUESTION 522
A company is upgrading its client computers from Windows XP to Windows 7.
You add an application to the Windows 7 base image. Large fonts are interfering with the appearance of the application.
You need to ensure that the application is displayed correctly on client computers that run Windows 7.
Which option should you select? (To answer, select the appropriate check box in the dialog box.)
 
Answer:
 

QUESTION 523
If you have a router in the network your connected to and the Default Gateway is set to 192.168.1.1 and the subnet mask is 255.255.255.0, which of the following are useable IP addresses on that network?

A.    192.168.1.1
B.    192.168.1.300
C.    192.168.1.30
D.    192.168.2.10

Answer: C

QUESTION 524
Which of the following is true of Windows 7?

A.    MailCentral is included as the new default mail client with Windows 7.
B.    Outlook Express is included with Windows 7.
C.    Microsoft Outlook is included with Windows 7.
D.    There is no preinstalled mail client included with Windows 7.

Answer: D

QUESTION 525
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A virtual hard disk (VHD) contains a Windows 7 Enterprise installation.
You need to mount the VHD on a client computer.
What should you do?

A.    Run the Dism command with the /Mount-Wim option.
B.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
C.    Run the Dism command with the /Add-Package option.
D.    Run the PEImg /prep command.
E.    Add a boot image in WDS.
F.    Run the Dism command with the /Add-Driver option.
G.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to True.
H.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to No.
I.    Run the BCDEdit command.
J.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to False.
K.    Run the Start /w ocsetup command.
L.    Run the ImageX command with the /mount parameter.
M.    Create a capture image in WDS.
N.    Run the Diskpart command and the attach command option.

Answer: N

QUESTION 526
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
A company has a server running Windows Server2008 R2, with Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK) set up.
The company also has client computers running Windows 7 Enterprise.
You need to remove a virtual hard disk boot option from the Windows startup menu on a client computer.
What should you do?

A.    Run the Start /w ocsetup command.
B.    Run the PEImg /prep command.
C.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to Yes.
D.    Run the ImageX command with the /mount parameter.
E.    Run the Diskpart command and the attach command option.
F.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to False.
G.    Run the Dism command with the /Mount-Wim option.
H.    Run the Dism command with the /Add-Driver option.
I.    Run the BCDEdit /delete command.
J.    Add a boot image and create a capture image in WDS.
K.    Use Sysprep with an answer file and set the UpdatelnstalledDrivers option in the answer file to No.
L.    Run the Dism command with the /Add-Package option.
M.    Use Sysprep with an answer file and set the PersistAllDevicelnstalls option in the answer file to True.

Answer: I

QUESTION 527
A company is upgrading its client computers from Windows XP to Windows 7.
You add an application to the Windows 7 base image. The menu on the title bar of the application is not displayed properly, although other graphical elements are displayed correctly.
You need to ensure that the application’s menu is displayed correctly on client computers that run Windows 7.
Which option should you choose to achieve this goal?
(To answer, select the appropriate check box in the dialog box.)
 
Answer:
 

QUESTION 528
A company’s security policy prohibits employees from running any software from Fabrikam on computers running Windows 7 Enterprise. The applications are digitally signed by the publisher.
You need to configure a single deny rule in AppLocker by applying a condition to restrict all of the applications from running, without affecting other programs.
You have selected one of Fabrikam’s applications as a reference.
Which property should you choose?
(To answer, select the appropriate setting or settings in the work area.)
 
Answer:
 

QUESTION 529
You use a computer that has Windows 7 installed.
You install a legacy application named LegApp. LegApp is designed for Windows 98 and does not support the 16-bit or 32-bit color quality setting.
You need to configure application compatibility settings for LegApp to meet the following requirements:
– Must be compatible with Windows 98.
– The 8-bit color quality setting must be used.
What should you do?
(To answer, configure the appropriate option or options in the dialog box in the answer area.)
 
Answer:
 

QUESTION 530
You use a computer that has Windows 7 SP1 installed to access your company’s internal website. The website requires a secure connection. The certificate is a self-signed Secure Socket Layer (SSL).
You attempt to connect to the internal website.
You receive the following error message:
“There is a problem with this website’s security certificate.”
You need to be able to connect to the internal website successfully. What should you do?

A.    From Internet Explorer, add the website to the Local Intranet zone.
B.    From Certificate Manager, import the website’s certificate into your Intermediate Certification Authorities store.
C.    From Certificate Manager, import the website’s certificate into your computer’s Personal store.
D.    From Internet Explorer, add the website to the Trusted Sites zone.

Answer: C

QUESTION 531
You use a portable computer that has Windows 7 SP1 installed and is a member of an Active Directory domain. The computer is connected to your Home network.
You run the ipconfig.exe command as shown in the exhibit.
You need to establish a DirectAccess connection from the computer to a DirectAccess server. What should you do first?
 

A.    Add the computer to a new HomeGroup.
B.    Configure a static IPv4 address.
C.    Create a new VPN connection.
D.    Enable IPv6 on the network adapter.

Answer: D

QUESTION 532
You have a mobile computer that runs Windows XP.
The computer has the following features:
– Contains a single hard disk drive.
– Contains a single partition.
– Supports USB devices during startup.
You are planning a clean installation of Windows 7 Ultimate.
You need to ensure that the installation of Windows 7 Ultimate will support BitLocker To Go Drive Encryption on the system partition.
What should you do?

A.    Use GPOs.
B.    Enable Encrypting File System (EFS).
C.    Verify that the computers have Trusted Platform Modules (TPM) version 1.2 security devices.
D.    Perform a clean install and encrypt the USB drive by using Bitlocker To Go.

Answer: D

QUESTION 533
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. Ananswer choice may be correct for more than one QUESTION in the series.
You create a new virtual hard disk (VHD) on a Windows 7 Enterprise computer. Then you install Windows 7 on the VHD.
After you reboot the computer, the Windows 7 boot menu shows two different Windows 7 installations titled “Windows 7”.
You need to ensure that the Windows 7 boot menu differentiates between the two Windows 7 installations.
What should you do?

A.    Add a boot image in WDS.
B.    Create a capture image in WDS.
C.    Run the BCDEdit command.
D.    Run the PEImg /prep command.
E.    Run the Start /w ocsetup command.
F.    Run the Dism command with the /Add-Driver option.
G.    Run the Dism command with the /Mount-Wim option.
H.    Run the Dism command with the /Add-Package option.
I.    Run the ImageX command with the /mount parameter.
J.    Run the Diskpart command and the attach command option.
K.    Use Syprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
L.    Use Syprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
M.    Use Syprep with an answer file and set the UpdateInstalledDrivers option in the answer file set to Yes.
N.    Use Syprep with an answer file and set the UpdateInstalledDrivers option in the answer file set to No.

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/cc709667(ws.10).aspx

QUESTION 534
You have a computer that runs Windows 7.
The computer’s hard disks are configured as shown in the following table:
 
You need to ensure that you can recover the operating system and all the files on the computer if hard disk experiences hardware failure.
What should you do?

A.    Create an Easy Transfer file on an external hard disk.
B.    Create an Easy Transfer file on a network location.
C.    Use the Backup and Restore tool to create a system image on an external hard disk.
D.    Use the Backup and Restore tool to back up data files for all users.

Answer: C
Explanation:
System Image in Windows 7
The new backup utilities in Windows 7 are actually pretty impressive and creating an image will be possible in all versions. Today we take a look at creating a backup image of your machine without the need for a third party utility like Ghost or True Image.
You are just finished installing a fresh copy of Windows 7 on your computer and have it set up to your liking. One of the first things you should do now is create an image of the disc so in the event of a crash you will be able to restore it to its current state. An image is an exact copy of everything on the drive and will restore it back to its current state. It’s probably best to create an image when everything is clean and organized on your system. This will make the image file smaller and allows you to restore the system with a smooth running set up.

QUESTION 535
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. AnAnswer choice may be correct for more than one QUESTION in the series.
A company has a deployment of Windows Deployment Services (WDS), the Microsoft Deployment Toolkit (MDT), and the Windows Automated Installation Kit (WAIK).
You are preparing to capture an image of a Windows 7 reference computer.
You plan to deploy the image to new computers that have the same hardware as the reference computer.
You need to ensure that the captured image contains the device drivers from the reference computer.
What should you do?

A.    Run the Dism command with the /Add-Driver option.
B.    Run the Dism command with the /Mount-Wim option.
C.    Run the BCDEdit command.
D.    Run the Start /w ocsetup command.
E.    Run the ImageX command with the /mount parameter.
F.    Run the Diskpart command and the attach command option.
G.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to True.
H.    Add a boot image in WDS.
I.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to Yes.
J.    Use Sysprep with an answer file and set the PersistAllDeviceInstalls option in the answer file to False.
K.    Create a capture image in WDS.
L.    Run the Dism command with the /Add-Package option.
M.    Use Sysprep with an answer file and set the UpdateInstalledDrivers option in the answer file to No.
N.    Run the PEImq /prep command.

Answer: G
Explanation:
Persisting Plug and Play Device Drivers During generalize You can persist device drivers when you run the sysprep command with the /generalize option by specifying the PersistAllDeviceInstallssetting in the Microsoft-Windows- PnPSysprep component. During the specialize configuration pass, Plug and Play scans the computer for devices and installs device drivers for the detected devices. By default, these device drivers are removed from the system when you generalize the system. If you set PersistAllDeviceInstalls to true in an answer file, Sysprep will not remove the detected device drivers. For more information, see the Unattended WindowsSetup Reference (Unattend.chm).
http://technet.microsoft.com/en-us/library/dd744512(WS.10).aspx


Thanks For Trying Braindump2go Latest Microsoft 70-680 Dumps Questions! Braindump2go Exam Dumps ADVANTAGES:
☆ 100% Pass Guaranteed Or Full Money Back!
☆ Instant Download Access After Payment!
☆ One Year Free Updation!
☆ Well Formated: PDF,VCE,Exam Software!
☆ Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
☆ Professional, Quick,Patient IT Expert Team 24/7/3574 Onlinen Help You!
☆ We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
☆ Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
☆ Pass any exams at the FIRST try!

http://www.braindump2go.com/70-680.html

         

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back